Yamaha

Yamaha FWX120 Hardware Firewall Networking

FWX120

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating PPP frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packets over the DSL connection to the ISP's IP network, and from there to the rest of the Internet. A 2005 networking book noted that "Most DSL providers use PPPoE, which provides authentication, encryption, and compression." Typical use of PPPoE involves leveraging the PPP facilities for authenticating the user with a username and password, predominately via the PAP protocol and less often via CHAP.

The technology that enables connectivity of the device, e.g. wired or wireless.

Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

The different speed levels of the Ethernet LAN connection.

The device includes a card reader e.g. a card reader in the disk bay of a computer or thin client to permit log-on using smart/pin cards.

Types of memory cards which can be used with this product.

The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.

Type of storage medium, like flash, hard disk drive, etc.

The voltage of the AC electricity that is inputted into the product.

The maximum amount of power used by the device.

The minimum and maximum temperatures at which the product can be safely operated.

Dimensions of the product (Width x Depth x Height).

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

The average rate of successful data delivery over through a Firewall. The throughput is usually measured in bits per second (bit/s or bps), and sometimes in data packets per second or data packets per time slot.

Yamaha FWX120. Firewall throughput: 1.024 Gbit/s. Certification: VCCI Class A, RoHS. Management protocols: SNMP (v1, v2c, v3), Routing protocols: BGP4, OSPF, RIP, RIP-2. LED indicators: LAN, Link, Power, Speed, Status, USB. Connectivity technology: Wired, Ethernet LAN data rates: 10,1000 Mbit/s, Compatible memory cards: MicroSD (TransFlash)

Yamaha FWX120, 1.024 Gbit/s, VCCI Class A, RoHS, SNMP (v1, v2c, v3), BGP4, OSPF, RIP, RIP-2, LAN, Link, Power, Speed, Status, USB, Wired

Yamaha FWX120 Hardware Firewall Networking

Reviews

Loading...

Description

Product Features:

Yamaha FWX120 hardware firewall 1.024 Gbit/s

Specification

Data transmission

Performance

Network

Protocols

Management features

Ports & interfaces

Memory

Storage

Power

Operational conditions

Weight & dimensions

Other features