Mobility Point MP-432
The MP-432 is a high performance 802.11n (3 x 3) Multiple Input / Multiple Output (MIMO), dual radio access point, with maximum aggregate data rates of up to 600 Mbps. It is designed for low-density deployments requiring maximum coverage.
It features built-in internal antennas to provide outstanding coverage and range enhancements without having to configure “rabbit ear” antennas. One radio operates in the 2.4 GHz band and the other in the 5 GHz band, with each radio featuring three radio transmit and receive chains. 3 x 3 MIMO provides significantly better range performance over implementations which use a more limited 2 x 3 system.
The MP-432 is backward compatible with legacy 802.11a/b/g clients in the 2.4 GHz and 5 GHz bands to provide investment protection without the need for a second overlay network. The MP-432 is compliant with the IEEE 802.11n Draft 2.0 standard, software upgradeable to the final standard, and tested extensively for interoperability with 802.11n clients and legacy 802.11a/b/g clients. The MP-432 supports all relevant encryption methods including WPA2 (Wi-Fi Protected Access 2 based on 802.11i), WPA (Wi-Fi Protected Access), in both Enterprise (802.1X) and Personal (pre-shared key) modes. The MP-432 does not store data, encryption keys or security credentials locally on the access point, and poses no security risk to the organization if stolen. A stolen MP-432 would be a useless inoperable device if not connected to an authorized network. The MP-432 also features two 10/100/1000 Ethernet ports for redundant data connectivity and redundant Power over Ethernet (PoE). The Gigabit Ethernet ports run in auto-negotiation mode to seamlessly adapt to the Ethernet infrastructure.
The MP-432 has extensive Power over Ethernet configuration options to fit the need of any deployment model. The MP-432 can be powered by any standardsbased 802.3af, 802.3af+ (draft 802.3at), or 802.3 at power source. If there is little to no current PoE infrastructure investment, a high power 802.3af+ device is recommended. If a significant investment in 802.3af PoE exists, or for other reasons a significant 802.3af PoE investment is contemplated, the MP-432 can operate with full functionality with this infrastructure. When powered with 802.3af on both ports simultaneously, the MP-432 operates in 3 x 3 MIMO on both radios. If powered with 802.3af on only, both radios operate in 2 x 3 MIMO mode. The MP-432 is compatible with all generations of Trapeze Networks Mobility Exchange WLAN controllers, and can be deployed without any hardware upgrades to the installed base of controllers.
Trapeze Networks MP-432 Wireless Access Point Networking
Product Name:
Brand:Trapeze Networks
Part Number (MPN):
Categories:
CPIN:
Product Views:
Info modified on:
Reviews
Description
Specification
Reviews
Loading...
Description
Product Features:
- 2.4 GHz
- 5 GHz
- Maximum data transfer rate: 1000 Mbit/s
- Power over Ethernet (PoE)
Trapeze Networks MP-432 wireless access point 1000 Mbit/s Power over Ethernet (PoE)
MP-432, RJ-45, 10/54/100/1000Mbps, 802.3i/u, 802.3ab/af/af+, 802.11 a/b/g/n, 802.11d/e/h/i/k, 802.1X, 802.11a/b/g/n/e/i, dual radio 3x3 MIMO, white
Trapeze Networks MP-432, 1000 Mbit/s, 10,100,1000 Mbit/s, 2.4 - 5.85 GHz, 10/100/1000Base-T(X), DSSS, OFDM, RJ-45, 3 X 3 MIMO
Trapeze Networks MP-432. Maximum data transfer rate: 1000 Mbit/s, Ethernet LAN data rates: 10,100,1000 Mbit/s, Frequency band: 2.4 - 5.85 GHz. Interface: RJ-45, 3 X 3 MIMO, WAN connection: Ethernet (RJ-45). Weight: 800 g. Supported data transfer rates: 10/54/100/1000Mbps, Compliance industry standards: 802.3i/u, 802.3ab/af/af+, 802.11 a/b/g/n, 802.11d/e/h/i/k, 802.1X, 802.11a/b/g/n/e/i, Safety: UL 60950-1, 1st Edition • CAN/CSA C22-2 No. 60950-1-03 • CB Scheme to IEC 60950-1 1st Edition.... Non-operating relative humidity (non-condensing): 10 - 95%
Specification
Features
2.4 GHz
5 GHz
Maximum data transfer rate
1000 Mbit/s
Ethernet LAN data rates
10,100,1000 Mbit/s
Frequency band
2.4 - 5.85 GHz
Cabling technology
10/100/1000Base-T(X)
MIMO
Modulation
DSSS, OFDM
Ports & interfaces
Interface
RJ-45, 3 X 3 MIMO
Ethernet LAN (RJ-45) ports
2
WAN connection
Ethernet (RJ-45)
Power
Power over Ethernet (PoE)
Design
Internal
Weight & dimensions
Weight
800 g
Other features
Supported data transfer rates
10/54/100/1000Mbps
Compliance industry standards
802.3i/u, 802.3ab/af/af+, 802.11 a/b/g/n, 802.11d/e/h/i/k, 802.1X, 802.11a/b/g/n/e/i
Non-operating relative humidity (non-condensing)
10 - 95%
Safety
UL 60950-1, 1st Edition • CAN/CSA C22-2 No. 60950-1-03 • CB Scheme to IEC 60950-1 1st Edition • EU Low Voltage Directive 2002/95/EC
Networking features
Gigabit Ethernet, Wireless LAN
Connectivity LEDs
Operational conditions
Operating temperature (T-T)
0 - 50 °C
Storage temperature (T-T)
-25 - 70 °C