PEAK

PEAK 154242NRPK Wireless Router Networking

802.11b/g Wireless B/Band Router

The number of channels the device has. There can be an individual input or output for each channel.

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

Network protocols tested as compatible with this product e.g. FTP,HTML, POP.

The colour e.g. red, blue, green, black, white.

Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Dimensions of the product (Width x Depth x Height).

Rates at which data can be transferred. May vary according to network configurations.

PEAK 802.11b/g Wireless B/Band Router. Channels quantity: 13 channels, Modulation: CCK, DBPSK, DQPSK. Receiver sensitivity: -80DBM(11MBPS), -66DBM(54MBPS). Supported network protocols: TCP/UDP/ICMP/ARP. Product colour: White. Antenna gain level (max): 2 dBi

PEAK 802.11b/g Wireless B/Band Router, White

PEAK 154242NRPK Wireless Router Networking

Reviews

Loading...

Description

PEAK 802.11b/g Wireless B/Band Router wireless router White

Specification

Wireless LAN features

Network

Ports & interfaces

Management features

Security

Protocols

Design

Antenna

Operational conditions

Weight & dimensions

Other features