Olitec

Olitec 000700 Wireless Router Networking

RW400N

Connection of this device is done via Wi-Fi in a high standard.

The type of wireless local area network (LAN). It can be ad-hoc, where units in a network communicate peer-to-peer, or Infrastructure, where units communicate with each other via an access point  A LAN interconnects computers in a small area e.g. home, school or office.

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.

The different speed levels of the Ethernet LAN connection.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

Network protocols tested as compatible with this product e.g. FTP,HTML, POP.

The colour e.g. red, blue, green, black, white.

Indicates whether this product supports is "plug and play". Plug and play is  hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.

Olitec RW400N. Top Wi-Fi standard: Wi-Fi 4 (802.11n), WLAN data transfer rate (max): 300 Mbit/s, Wi-Fi standards: 802.11b, 802.11g, Wi-Fi 4 (802.11n). Ethernet LAN data rates: 10,100 Mbit/s, Cabling technology: 10/100Base-T(X), Networking standards: IEEE 802.3. Security algorithms: 128-bit WEP, 64-bit WEP, WPA, WPA2, WPS. Supported network protocols: NAT, NAPT, PAP/CHAP, DMZ, PPTP, PPPoE. Product colour: Black, White

Olitec RW400N, Wi-Fi 4 (802.11n), Ethernet LAN, ADSL, Black, White

Olitec 000700 Wireless Router Networking

Reviews

Loading...

Description

Product Features:

Olitec RW400N wireless router Black, White

Specification

WAN connection

Wireless LAN features

Network

DSL features

Ports & interfaces

Management features

Security

Protocols

Design

Packaging content

Antenna

Features

Other features