Olitec

Olitec 000542 Wireless Router Networking

WF402SG

The number of channels the device has. There can be an individual input or output for each channel.

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

Network protocols tested as compatible with this product e.g. FTP,HTML, POP.

The colour e.g. red, blue, green, black, white.

Indicates whether this product supports is "plug and play". Plug and play is  hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.

The lowest speed that the computer processor can run at, or the minimum amount of processing capacity that can be used, for the computer and particular program(s) to function.

The lowest RAM (memory) required to run a computer program or operating system.

List of desktop operating systems tested as compatible with this product.

Rates at which data can be transferred. May vary according to network configurations.

Olitec WF402SG. Channels quantity: 13 channels, Modulation: CCK, DBPSK, DQPSK, OFDM. Networking standards: IEEE 802.11g. DSL specification: ANSI T1.143 Issue2, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5. Security algorithms: WEP, WPA. Supported network protocols: APPP, PPPoE, PPPoA

Olitec 000542 Wireless Router Networking

Reviews

Loading...

Description

Olitec WF402SG wireless router Black

Specification

Wireless LAN features

Network

DSL features

Ports & interfaces

Security

Protocols

Design

Features

System requirements

Other features