In addition to the solution with the fiber optic connection, MICROSENS also offers micro switches with twisted pair uplink. With the integrated switches – the most compactly designed on the market – upgrading of Ethernet connections as well as Power-over-Ethernet can be made at the work location at no great expenditure.
Beside the standard version with integrated 230 VAC power unit, there is an extended version available with Power-over-Ethernet and 48 VDC power connection. The PoE version can be supplied over the uplink port via PoE and is therefore completely independent of an external power supply. The power of up to 15.4 W (Class 0) is not only for the own supply (Powered Device, PD) but can be fed to the user connections so that it is available to other users (Power Source Equipment, PSE)
Microsense MS450155PM-48 Network Switch Networking
Reviews
Description
Specification
Media
Reviews
Loading...
Description
Product Features:
- Versions with 5x and 6x 10/100TX
- Internal 230VAC power supply, optional PoE version with 48 VDC
- Easy expansion of the port capacity (1 to 4 ports)
- Easy administration (Web-, Telnet-, SNMP-interface and NMP Platform)
- VLANs, data prioritisation (QoS), authentication according to 802.1X
- Port based VLANs (traffic segmentation)
- Fast, tool-free mounting by snap-in installation
- Power-over-Ethernet for powering VoIP phones, IP cameras, WLAN, APs, etc. (PoE version)
- alternative power supply via uplink port using Power over Ethernet (Powered Device)
- Unmanaged L2+
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 4
- MAC address table: 2048 entries
- Power over Ethernet (PoE)
Microsense MS450155PM-48 network switch Unmanaged L2+ Fast Ethernet (10/100) Power over Ethernet (PoE) White
5 Port Fast Ethernet Micro-Switch 45x45 vertical, 4x10/100TX with 1x10/100Base-TX uplink, 48 VDC external power supply optional through 10/100TX uplink port
Microsense MS450155PM-48, Unmanaged, L2+, Fast Ethernet (10/100), Power over Ethernet (PoE)
Microsense MS450155PM-48. Switch type: Unmanaged, Switch layer: L2+. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 4. MAC address table: 2048 entries. Networking standards: IEEE 802.1p, IEEE 802.3ac, IEEE 802.3x. DC input voltage: 44 - 57 V. Power connector: AC-in jack. Power over Ethernet (PoE)
Specification
Management features
Switch type
Unmanaged
Switch layer
L2+
Quality of Service (QoS) support
Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity
4
Basic switching RJ-45 Ethernet ports type
Fast Ethernet (10/100)
Power connector
AC-in jack
Network
Networking standards
IEEE 802.1p, IEEE 802.3ac, IEEE 802.3x
10G support
No
Flow control support
Yes
Auto MDI/MDI-X
Yes
Spanning tree protocol
Yes
MAC address auto-learning supported
Yes
MAC address auto-aging supported
Yes
VLAN support
Yes
Virtual LAN features
Tagged VLAN
Data transmission
MAC address table
2048 entries
Store-and-forward
Yes
Design
Rack mounting
No
Stackable
No
Product colour
White
Reset button
Yes
Safety
EN 60950-1:2006
Performance
Mean time between failures (MTBF)
100000 h
Power
AC input voltage
195 - 265 V
AC input frequency
50 - 60 Hz
DC input voltage
44 - 57 V
Power consumption (typical)
4 W
Power consumption (max)
65 W
Power over Ethernet (PoE)
Power over Ethernet (PoE)
Yes
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-20 - 85 °C
Operating relative humidity (H-H)
10 - 90%
Weight & dimensions
Width
90 mm
Depth
45 mm
Height
57 mm
Weight
200 g
Packaging data
Manual
Yes
Terminal block included
Yes