Kramer Electronics

Kramer Electronics 91-0002763 Network Transceiver Module Networking

AXM763

The maximum speed with which data can be transmitted from one device to another.

This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.

The greatest distance over which the data/signal can be transferred.

The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.

The colour e.g. red, blue, green, black, white.

Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

The measurement or extent of something from side to side.

The distance from the front to the back of something.

The measurement of the product from head to foot or from base to top.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

The number of products that are included in the package.

Kramer Electronics AXM763. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Product colour: Stainless steel, Mean time between failures (MTBF): 966837 h, Certification: UL, CSA. Power consumption (typical): 1.5 W. Width: 11.9 mm, Depth: 55.7 mm, Height: 13.7 mm. Number of products included: 1 pc(s)

Kramer Electronics AXM763, Fiber optic, 10000 Mbit/s, SFP+, SFP+, 62.5/125 µm, 220 m

Kramer Electronics 91-0002763 Network Transceiver Module Networking

Reviews

Loading...

Description

Product Features:

Kramer Electronics AXM763 network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

Specification

Performance

Features

Power

Operational conditions

Weight & dimensions

Packaging data

Technical details