i-tec

i-tec WPOINT-N Wireless Router Networking

WPOINT-N

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.

The characteristics of the Ethernet LAN interface.

The different speed levels of the Ethernet LAN connection.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

The socket/plug where the DC electricity supply connects to the device.

Using a website/web application to manage something.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

The colour e.g. red, blue, green, black, white.

Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.

Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

List of desktop operating systems tested as compatible with this product.

Dimensions of the product (Width x Depth x Height).

The frequency (Hz) which is required to power the product.

The voltage (V) which is required to power the product.

i-tec WPOINT-N. WLAN data transfer rate (max): 300 Mbit/s, Modulation: 16-QAM, 64-QAM, CCK, DBPSK, DQPSK, OFDM. Ethernet LAN interface type: Fast Ethernet, Ethernet LAN data rates: 10,100 Mbit/s, Cabling technology: 10/100Base-T(X). Product colour: Black, White. Cables included: LAN (RJ-45). Antenna gain level (max): 2 dBi

i-tec WPOINT-N, Ethernet LAN, Black, White

i-tec WPOINT-N Wireless Router Networking

Reviews

Loading...

Description

Product Features:

i-tec WPOINT-N wireless router Fast Ethernet Black, White

Specification

WAN connection

Wireless LAN features

Network

Ports & interfaces

Management features

Protocols

Design

Packaging content

Antenna

Operational conditions

Other features

Media