i-tec

i-tec WPOINT-3G Wireless Router Networking

WPOINT-3G

Connection of this device is done via Wi-Fi in a high standard.

The type of wireless local area network (LAN). It can be ad-hoc, where units in a network communicate peer-to-peer, or Infrastructure, where units communicate with each other via an access point  A LAN interconnects computers in a small area e.g. home, school or office.

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.

The characteristics of the Ethernet LAN interface.

The different speed levels of the Ethernet LAN connection.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

The socket/plug where the DC electricity supply connects to the device.

Using a website/web application to manage something.

Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.

Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

The colour e.g. red, blue, green, black, white.

Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

Dimensions of the product (Width x Depth x Height).

Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.

The frequency (Hz) which is required to power the product.

The voltage (V) which is required to power the product.

i-tec WPOINT-3G. Top Wi-Fi standard: Wi-Fi 4 (802.11n), WLAN data transfer rate (max): 150 Mbit/s, Wi-Fi standards: 802.11b, 802.11g, Wi-Fi 4 (802.11n). Ethernet LAN interface type: Fast Ethernet, Ethernet LAN data rates: 10,100 Mbit/s, Cabling technology: 10/100Base-T(X). Product colour: Grey. Cables included: AC, LAN (RJ-45), USB. WLAN data transfer rates supported: 1,6,11,54,108,150 Mbit/s, Dimensions (WxDxH): 68 x 16 x 90 mm, Interface: USB

i-tec WPOINT-3G, Wi-Fi 4 (802.11n), Ethernet LAN, Grey

i-tec WPOINT-3G Wireless Router Networking

Reviews

Loading...

Description

Product Features:

i-tec WPOINT-3G wireless router Fast Ethernet Grey

Specification

WAN connection

Wireless LAN features

Network

Ports & interfaces

Management features

Security

Protocols

Design

Packaging content

Operational conditions

Other features

Media