I-O Data

I-O Data WHG-AC1750A-E Wireless Access Point Networking

WHG-AC1750A-E

The maximum speed with which data can be transmitted from one device to another.

The different speed levels of the Ethernet LAN connection.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

The number of channels the device has. There can be an individual input or output for each channel.

A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.

The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.

The maximum amount of power used by the device.

Where the product can be placed e.g. floor, wall.

The colour e.g. red, blue, green, black, white.

The way in which the antenna is connected to the device e.g. coaxial.

The measurement or extent of something from side to side.

The distance from the front to the back of something.

The measurement of the product from head to foot or from base to top.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

I-O Data WHG-AC1750A-E. Maximum data transfer rate: 1300 Mbit/s, Wi-Fi data rate (max): 1300 Mbit/s, Ethernet LAN data rates: 10,100,1000 Mbit/s. Security algorithms: 64-bit WEP, 128-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-EAP, WPA2-PSK, WPA2-TKIP. Management protocols: SNMP (v1 / v2c / v3). Power consumption (max): 12.5 W. Placement: Ceiling, Table, Product colour: Silver, Certification: RoHS, VCCI Class B

I-O Data WHG-AC1750A-E, 1300 Mbit/s, 1300 Mbit/s, 10,100,1000 Mbit/s, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, 13 channels, 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK

I-O Data WHG-AC1750A-E Wireless Access Point Networking

Reviews

Loading...

Description

Product Features:

I-O Data WHG-AC1750A-E wireless access point 1300 Mbit/s Silver Power over Ethernet (PoE)

Specification

Features

Security

Protocols

Ports & interfaces

Power

Design

Antenna

Weight & dimensions

Packaging data

Packaging content

Operational conditions