I-O Data

I-O Data LCD-AD173SESW Computer Monitor Monitor & Accessory

AD173SESW

Size of the display for this product, measured diagonally, usually in inches.

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

Type of supported High Definition (e.g. Full HD, 4K Ultra HD).

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

The technology used in the display e.g. plasma, LED.

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

Display brightness, measured by its Luminance, presented as a figure in candela per square meter (cd/m2). Typical brightness ratings for monitors range from 250 to 350 cd/m2 with a target value of between 80 to 120 cd/m2 being suitable for most displays in a normal viewing environment.

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

The graphic resolutions that can be displayed by the device. The graphic resolution describes the width and height dimensions of a display, such as a computer monitor, measured in pixels.

The difference in light intensity between the brightest white and the darkest black.

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.

The device can be used with 3D technology.

The product includes AMD Freesync Technology for the dynamic synchronization of the graphic card and the monitor in order to avoid screen tearing.

The device contains speaker(s) to produce sound.

The quantity of speakers included in/with the product.

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

The colour e.g. red, blue, green, black, white.

Whether or not the device features a USB hub to connect more than one other device via USB.

Digital Visual Interface (DVI) is a video display interface to connect a video source to a display device, such as a computer monitor.

This is the amount of DVI-I interfaces. Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source to a display device, such as a computer monitor. DVI-D means DVI digital, which means it can only support digital, but not analog.

The socket for connecting headphones to the device.

Number of sockets /ports where headphones are connected.

How headphones connect to a device e.g. wirelessly or via a cable and connector.

Holes on the edge of devices through which a cable lock can be passed, so the device can be locked to a desk etc.

The tilt, which means the angle at which the device is pointing (up or down), can be changed.

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

The amount of electricity that is consumed when the product is on standby.

The maximum amount of power used by the device.

The voltage of the AC electricity that is inputted into the product.

The amount of energy used by the product per year.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

The distance from one side of the packaging to the other.

The distance from the front to the back of the packaging.

The distance from the top to the bottom of the packaging.

The description of display that can includes display type, resolution, size etc.

The button which is pressed to switch the device on or off.

I-O Data AD173SESW. Display diagonal: 43.2 cm (17"), Display resolution: 1280 x 1024 pixels, HD type: SXGA, Display technology: LED. Display: LED. Response time: 5 ms, Native aspect ratio: 4:3, Viewing angle, horizontal: 160°, Viewing angle, vertical: 170°. Built-in speaker(s). VESA mounting. Product colour: White

I-O Data AD173SESW, 43.2 cm (17"), 1280 x 1024 pixels, SXGA, LED, 5 ms, White

I-O Data LCD-AD173SESW Computer Monitor Monitor & Accessory

Reviews

Loading...

Description

Product Features:

I-O Data AD173SESW LED display 43.2 cm (17") 1280 x 1024 pixels SXGA White

Specification

Display

Performance

Multimedia

Design

Ports & interfaces

Ergonomics

Power

Operational conditions

Weight & dimensions

Packaging data

Other features