Fujitsu

Fujitsu S26361-K1271-V170 Computer Monitor Monitor & Accessory

SCALEOVIEW L20W-4

Size of the display for this product, measured diagonally, usually in inches.

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

Display brightness, measured by its Luminance, presented as a figure in candela per square meter (cd/m2). Typical brightness ratings for monitors range from 250 to 350 cd/m2 with a target value of between 80 to 120 cd/m2 being suitable for most displays in a normal viewing environment.

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

The difference in light intensity between the brightest white and the darkest black.

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

The device contains speaker(s) to produce sound.

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.

How headphones connect to a device e.g. wirelessly or via a cable and connector.

The product can be used wih VESA mounting interfaces.

Indicates whether this product supports is "plug and play". Plug and play is  hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

The amount of electricity that is consumed when the product is on standby.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

The description of display that can includes display type, resolution, size etc.

Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.

Fujitsu SCALEOVIEW Series SCALEOVIEW L20W-4. Display diagonal: 50.8 cm (20"), Display resolution: 1680 x 1050 pixels. Display: LCD. Response time: 5 ms, Viewing angle, horizontal: 170°, Viewing angle, vertical: 170°. Built-in speaker(s)

Fujitsu SCALEOVIEW Series SCALEOVIEW L20W-4, 50.8 cm (20"), 1680 x 1050 pixels, LCD, 5 ms

Fujitsu S26361-K1271-V170 Computer Monitor Monitor & Accessory

Reviews

Loading...

Description

Product Features:

Fujitsu SCALEOVIEW Series SCALEOVIEW L20W-4 computer monitor 50.8 cm (20") 1680 x 1050 pixels

Specification

Display

Multimedia

Ports & interfaces

Ergonomics

Power

Operational conditions

Weight & dimensions

Sustainability

Other features

Media