Ernitec

Ernitec 0070-24219-BNC Computer Monitor Monitor & Accessory

Surveillance

Size of the display for this product, measured diagonally, usually in inches.

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

Type of supported High Definition (e.g. Full HD, 4K Ultra HD).

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

The technology used in the display e.g. plasma, LED.

Display brightness, measured by its Luminance, presented as a figure in candela per square meter (cd/m2). Typical brightness ratings for monitors range from 250 to 350 cd/m2 with a target value of between 80 to 120 cd/m2 being suitable for most displays in a normal viewing environment.

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

The difference in light intensity between the brightest white and the darkest black.

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.

This is the size of the display screen, measured diagonally.

The device contains speaker(s) to produce sound.

The quantity of speakers included in/with the product.

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

Under which category can the device be positioned in the market, e.g. camera phone.

The colour e.g. red, blue, green, black, white.

Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.

HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

The type of audio input that the device requires, and the connection needed.

The type of audio output that the device produces, and the connector(s).

Ports (sockets) to connect BNC inputs. The BNC connector (Bayonet Neill–Concelman) is a miniature quick connect/disconnect RF connector used for coaxial cable.

The product can be used wih VESA mounting interfaces.

Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.

The distance from one side of the packaging to the other.

The distance from the front to the back of the packaging.

The distance from the top to the bottom of the packaging.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

The measurement of the product from head to foot or from base to top.

The measurement or extent of something from side to side.

The distance from the front to the back of something.

Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.

Ernitec Surveillance. Display diagonal: 48.3 cm (19"), Display resolution: 1920 x 1080 pixels, HD type: Full HD, Display technology: LED, Response time: 5 ms, Native aspect ratio: 16:9, Viewing angle, horizontal: 178°, Viewing angle, vertical: 178°. Built-in speaker(s). VESA mounting. Product colour: Black

Ernitec Surveillance, 48.3 cm (19"), 1920 x 1080 pixels, Full HD, LED, 5 ms, Black

Ernitec 0070-24219-BNC Computer Monitor Monitor & Accessory

Reviews

Loading...

Description

Product Features:

Ernitec Surveillance computer monitor 48.3 cm (19") 1920 x 1080 pixels Full HD LED Black

Specification

Display

Multimedia

Design

Ports & interfaces

Ergonomics

Power

Packaging content

Packaging data

Other features

Media