Ernitec

Ernitec 0070-24124-2 Computer Monitor Monitor & Accessory

0070-24124-2

Size of the display for this product, measured diagonally, usually in inches.

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

Type of supported High Definition (e.g. Full HD, 4K Ultra HD).

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

The technology used in the display e.g. plasma, LED.

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

Display brightness, measured by its Luminance, presented as a figure in candela per square meter (cd/m2). Typical brightness ratings for monitors range from 250 to 350 cd/m2 with a target value of between 80 to 120 cd/m2 being suitable for most displays in a normal viewing environment.

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

The graphic resolutions that can be displayed by the device. The graphic resolution describes the width and height dimensions of a display, such as a computer monitor, measured in pixels.

The aspect ratio is the ratio of the width of a shape to its height. For example, 4:3 is common for standard displays and 16:9 is the ratio for Widescreen TV.

The difference in light intensity between the brightest white and the darkest black.

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.

The device contains speaker(s) to produce sound.

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

Under which category can the device be positioned in the market, e.g. camera phone.

The colour e.g. red, blue, green, black, white.

The colour of the feet, which are the projecting part on which a device/piece of furniture, or each of its legs, stands.

Whether or not the device features a USB hub to connect more than one other device via USB.

Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.

This is the amount of DVI-I interfaces. Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source to a display device, such as a computer monitor. DVI-D means DVI digital, which means it can only support digital, but not analog.

HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.

Number of DisplayPorts. A DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to carry audio, USB, and other forms of data.

The socket for connecting headphones to the device.

The product can be used wih VESA mounting interfaces.

The part of the device that can be adjusted to change the height.

The tilt, which means the angle at which the device is pointing (up or down), can be changed.

Indicates whether this product supports is "plug and play". Plug and play is  hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.

The voltage of the AC electricity that is inputted into the product.

The minimum and maximum temperatures at which the product can be safely operated.

Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.

The distance from one side of the packaging to the other.

The distance from the front to the back of the packaging.

The distance from the top to the bottom of the packaging.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

The measurement of the product from head to foot or from base to top.

The measurement or extent of something from side to side.

The distance from the front to the back of something.

Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.

Ernitec 0070-24124-2. Display diagonal: 61 cm (24"), Display resolution: 1920 x 1080 pixels, HD type: Full HD, Display technology: LED, Response time: 5 ms, Native aspect ratio: 16:9, Viewing angle, horizontal: 178°, Viewing angle, vertical: 178°. Built-in speaker(s). VESA mounting. Product colour: Black

Ernitec 0070-24124-2, 61 cm (24"), 1920 x 1080 pixels, Full HD, LED, 5 ms, Black

Ernitec 0070-24124-2 Computer Monitor Monitor & Accessory

Reviews

Loading...

Description

Product Features:

Ernitec 0070-24124-2 LED display 61 cm (24") 1920 x 1080 pixels Full HD Black

Specification

Display

Performance

Multimedia

Design

Ports & interfaces

Ergonomics

Power

Operational conditions

Packaging content

Packaging data

Sustainability

Other features

Media