Epcom

Epcom EP-TB-4G Cellular Signal Booster Networking

EP-TB-4G

In the context of satellite communications, an uplink (UL) is the portion of a communications link used for the transmission of signals from an Earth terminal to a satellite. In cellular networks,  the radio uplink is the transmission path from the mobile station (cell phone) to a base station (cell site). The uplink frequency range is the lowest and highest frequencies of the uplink.

In the context of satellite communications, a downlink (DL) is the link from a satellite to a ground station. In cellular networks, the radio downlink is the transmission path from a cell site to the cell phone. The downlink frequency range is the lowest and highest frequencies of the downlink.

In the context of satellite communications, an uplink (UL) is the portion of a communications link used for the transmission of signals from an Earth terminal to a satellite. In cellular networks,  the radio uplink is the transmission path from the mobile station (cell phone) to a base station (cell site). Uplink gain is a measure of the ability of the uplink circuit  to increase the power or amplitude of a signal from the input to the output, by adding energy to the signal converted from some power supply.

Telecommunications network that allows computers to exchange data.

The colour e.g. red, blue, green, black, white.

The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance.

The voltage (V) which is required to power the product.

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

The minimum and maximum temperatures at which the product can be safely operated.

The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".

The measurement or extent of something from side to side.

The distance from the front to the back of something.

The measurement of the product from head to foot or from base to top.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Epcom EP-TB-4G. Input voltage: 100 - 264 V, Power consumption (typical): 6 W. Width: 150 mm, Depth: 30 mm, Height: 210 mm

Epcom EP-TB-4G, 100 - 264 V, 6 W, -5 - 45 °C, IP40, 150 mm, 30 mm

Epcom EP-TB-4G Cellular Signal Booster Networking

Reviews

Loading...

Description

Epcom EP-TB-4G cellular signal booster Indoor cellular signal booster White

Specification

Technical details

Power

Operational conditions

Weight & dimensions