Edge10

Edge10 EF190A Computer Monitor Monitor & Accessory

EF190a

Size of the display for this product, measured diagonally, usually in inches.

The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.

The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.

A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.

Display brightness, measured by its Luminance, presented as a figure in candela per square meter (cd/m2). Typical brightness ratings for monitors range from 250 to 350 cd/m2 with a target value of between 80 to 120 cd/m2 being suitable for most displays in a normal viewing environment.

The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)

The graphic resolutions that can be displayed by the device. The graphic resolution describes the width and height dimensions of a display, such as a computer monitor, measured in pixels.

The aspect ratio is the ratio of the width of a shape to its height. For example, 4:3 is common for standard displays and 16:9 is the ratio for Widescreen TV.

The difference in light intensity between the brightest white and the darkest black.

A property of a display system, defined as the ratio of the luminance of the brightest color (white) to that of the darkest color (black) that the system is capable of producing.

Maximum horizontal angle at which a display can be viewed with acceptable visual performance.

Maximum vertical angle at which a display can be viewed with acceptable visual performance.

This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.

The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.

The device can be used with 3D technology.

The device contains speaker(s) to produce sound.

The quantity of speakers included in/with the product.

RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplifiers and loudspeakers.

Under which category can the device be positioned in the market, e.g. camera phone.

The colour e.g. red, blue, green, black, white.

Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.

Digital Visual Interface (DVI) is a video display interface to connect a video source to a display device, such as a computer monitor.

This is the amount of DVI-I interfaces. Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source to a display device, such as a computer monitor. DVI-D means DVI digital, which means it can only support digital, but not analog.

The product can be used wih VESA mounting interfaces.

Holes on the edge of devices through which a cable lock can be passed, so the device can be locked to a desk etc.

The part of the device that can be adjusted to change the height.

The tilt, which means the angle at which the device is pointing (up or down), can be changed.

Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.

The amount of electricity that is consumed when the product is on standby.

The voltage of the AC electricity that is inputted into the product.

The product includes a thin client, which is a computer or a computer program which depends heavily on some other computer (its server) to fulfill its computational roles. This is different from the traditional fat client, which is a computer designed to take on these roles by itself. The specific roles assumed by the server may vary, from providing data persistence (for example, for diskless nodes) to actual information processing on the client's behalf.

The description of display that can includes display type, resolution, size etc.

Edge10 EF190a. Display diagonal: 48.3 cm (19"), Display resolution: 1440 x 900 pixels. Display: LED. Response time: 5 ms, Native aspect ratio: 16:10, Viewing angle, horizontal: 170°, Viewing angle, vertical: 160°. Built-in speaker(s). VESA mounting. Product colour: Black

Edge10 EF190a, 48.3 cm (19"), 1440 x 900 pixels, LED, 5 ms, Black

Edge10 EF190A Computer Monitor Monitor & Accessory

Reviews

Loading...

Description

Product Features:

Edge10 EF190a LED display 48.3 cm (19") 1440 x 900 pixels Black

Specification

Display

Multimedia

Design

Ports & interfaces

Ergonomics

Power

Packaging content

Weight & dimensions

Thin Client

Other features