Creative Labs

Creative Labs F-70SB124000005 Audio Card Computer Component

Sound Blaster X-Fi HD

An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.

This is the Signal-to-Noise Ratio of the line out (output) of the device. The SNR is defined as the ratio of signal power to the noise power, often expressed in decibels. A ratio higher than 1:1 (greater than 0 dB) indicates more signal than noise.

Interface that enables a host controller to communicate with a driver.

Number of sockets /ports where headphones are connected.

S/PDIF (Sony/Philips Digital Interconnect Format) is a digital audio interconnect used in consumer audio equipment over relatively short distances. The signal is transmitted over either a coaxial cable with RCA connectors or a fibre optic cable with TOSLINK connectors.

Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.

The socket where a microphone is connected to the device.

The lowest RAM (memory) required to run a computer program or operating system.

The lowest speed that the computer processor can run at, or the minimum amount of processing capacity that can be used, for the computer and particular program(s) to function.

Creative Labs Sound Blaster X-Fi HD. Audio output channels: 5.1 channels, Audio quality: 24 bit, Line-out Signal-to-Noise Ratio (SNR): 114 dB. Host interface: USB. Minimum RAM: 1024 MB, Minimum processor: 2.2 GHz

Creative Labs Sound Blaster X-Fi HD, 5.1 channels, 24 bit, 114 dB, USB

Creative Labs F-70SB124000005 Audio Card Computer Component

Reviews

Loading...

Description

Creative Labs Sound Blaster X-Fi HD 5.1 channels USB

Specification

Audio

Ports & interfaces

System requirements