Atlantis Land

Atlantis Land A02-AP4-W300N Wireless Access Point Networking

NetFly AP4 W300N+

The maximum speed with which data can be transmitted from one device to another.

The different speed levels of the Ethernet LAN connection.

A small section of the spectrum of radio communication frequencies, in which channels are usually used or set aside for the same purpose e.g.for a channel on FM radio; for mobile networks to communicate with mobile phones.

The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.

The number of channels the device has. There can be an individual input or output for each channel.

Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.

The maximum distance to which the signals are transmitted, when the device is used indoors.

The maximum distance to which the signals are transmitted, when the device is used outdoors.

Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.

Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

Network protocols tested as compatible with this product e.g. FTP,HTML, POP.

Using a website/web application to manage something.

Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device.  Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.

A wide area network (WAN) is a network that covers a broad area (i.e. any telecommunications network that links across metropolitan, regional, or national boundaries such as the Internet) using private or public network transports. Business and government entities utilize WANs to relay data among employees, clients, buyers, and suppliers from various geographical locations.

The socket/plug where the DC electricity supply connects to the device.

The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.

Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.

The way in which the antenna is connected to the device e.g. coaxial.

The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.

Dimensions of the product (Width x Depth x Height).

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

List of characteristics that describe methods of compliance to industry-defined standards for the product

Technology that communicates with other devices without a physical connection e.g. radio, WiFi.

The minimum and maximum temperatures at which the product can be safely operated.

Atlantis Land NetFly AP4 W300N+. Maximum data transfer rate: 300 Mbit/s, Ethernet LAN data rates: 10,100 Mbit/s, Frequency band: 2.412 - 2.472 GHz. Security algorithms: 128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK, WPS, Security features: Network address translation (NAT), DoS detection, Stateful packet inspection (SPI). Supported network protocols: DNS, TCP/IP, HTTP, Management protocols: WMM, IGMP, PPPoE, Media access protocol: CSMA/CA. WAN connection: Ethernet (RJ-45), Interface type: RJ-45. Power requirements: 5V AC/DC, 1A

Atlantis Land NetFly AP4 W300N+, 300 Mbit/s, 10,100 Mbit/s, 2.412 - 2.472 GHz, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, 10/100Base-T(X), 13 channels

Atlantis Land A02-AP4-W300N Wireless Access Point Networking

Reviews

Loading...

Description

Product Features:

Atlantis Land NetFly AP4 W300N+ 300 Mbit/s Power over Ethernet (PoE)

Specification

Features

Security

Protocols

Management features

Ports & interfaces

Power

Design

Antenna

Performance

Weight & dimensions

Packaging content

Other features

Operational conditions