Approx

Approx APPLS18I Barcode Reader Printer & Scanner

appLS18I

Indicates the type of scanner this product is.

A sensor is a convertor than measures a physical quality (light, temperature etc.) and displays this electronically on a device.

The product can read linear (1D) barcordes.

The product can read matrix (2D) barcordes.

The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.

The technology that enables connectivity of the device, e.g. wired or wireless.

Most common industry-standard communication protocols ranging from RS-232, RS-422, RS-423, RS-485, and LVDS to USB.

The type of bluetooth technology in the product e.g. Bluetooth Smart (v4.0).

The rate at which an electrical current alternates, usually measured in Hertz (Hz). Also the way to note a general location on the radio frequency spectrum such as 800 MHz, 900 MHz or 1900 MHz.

The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".

The colour e.g. red, blue, green, black, white.

The type of battery in the device, e.g. nickel–cadmium (NiCd).

Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).

A measure of the charge stored by the battery. Determined by the mass of active material contained in the battery.

The amount of time that the battery will last for.

The amount of time needed to charge the product.

The voltage (V) which is required to power the product.

The measurement or extent of something from side to side.

The distance from the front to the back of something.

The measurement of the product from head to foot or from base to top.

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

The minimum and maximum temperatures at which the product can be safely operated.

The minimum and maximum temperatures at which the product can be safely stored.

Approx appLS18I. Type: Handheld bar code reader, Scanner type: 1D, Sensor type: Laser. Connectivity technology: Wireless, Standard interfaces: Bluetooth, RF Wireless, USB, Wireless range: 100 m. Product colour: Grey, Orange, International Protection (IP) code: IP67. Power source type: Battery, Battery technology: Lithium-Ion (Li-Ion), Battery type: Built-in battery. Weight: 267 g, Width: 75 mm, Depth: 95 mm

Approx appLS18I, Handheld bar code reader, 1D, Laser, Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN 128, EAN-13, EAN-8, IATA, Interleaved 2..., 300 reads/s, 625 nm

Approx APPLS18I Barcode Reader Printer & Scanner

Reviews

Loading...

Description

Product Features:

Approx appLS18I Handheld bar code reader 1D Laser Grey, Orange

Specification

Scanning

Ports & interfaces

Performance

Power

Weight & dimensions

Packaging data

Operational conditions

Media