Altai Technologies

Altai Technologies SD.IX500-2231-0UK Wireless Access Point Networking

IX500

The maximum speed with which data can be transmitted from one device to another.

A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.

Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.

Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.

A server is a system which that responds to requests across a computer network to provide, or help to provide, a network service. DCHP servers uses the DCHP (Dynamic Host Configuration Protocol), which is a standardized networking protocol used by servers on an IP network to allocate IP addresses to computers. The purpose of DHCP is to automate the IP address configuration of a computer without a network administrator. IP addresses are typically selected from a range of assigned IP addresses stored in a database on the server and issued to a computer which requests a new IP address. An IP address is assigned to a computer for a set interval, after which, the computer must renew the IP address or acquire a new one.

Whether the product features a DHCP (Dynamic Host Configuration Protocol) to obtain IP addresses within a network.

The socket/plug where the DC electricity supply connects to the device.

The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.

The voltage of the AC electricity that is inputted into the product.

Where the product can be placed e.g. floor, wall.

The colour e.g. red, blue, green, black, white.

Type of antenna, also known an aerial, e.g. external, internal.

Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.

Altai Technologies IX500. Maximum data transfer rate: 867 Mbit/s, MIMO type: Multi User MIMO. Security algorithms: AES, TKIP, WEP, WPA2, WPA2-PSK, WPA3. AC input voltage: 12 V. Placement: Ceiling, Wall, Product colour: White. Antenna type: Internal, Antenna gain level (max): 5 dBi

Altai Technologies IX500, 867 Mbit/s, Multi User MIMO, AES, TKIP, WEP, WPA2, WPA2-PSK, WPA3, 12 V, Ceiling, Wall, White

Altai Technologies SD.IX500-2231-0UK Wireless Access Point Networking

Reviews

Loading...

Description

Product Features:

Altai Technologies IX500 867 Mbit/s White Power over Ethernet (PoE)

Specification

Features

Security

Protocols

Ports & interfaces

Power

Design

Antenna